aggregates specifications
Make/Type Simpson S325 Direct Injection Diesel engine
Cylinders 3
Bore/Stroke 91.44/127 mm (3.6"/5")
Cubic Capacity 152 cubic inches (2.5) litres
Air cleaner Dry Type
Cooling Pressurized water cooling
Fuel Injection Pump Make MICO Inline Pump
Rated Engine HP 47.0 HP @ 2250 Erpm as per BS Au 141 a
Starting Aid Thermostat (optional)
Type Dual Dry friction type
Tractor Driving plate 12" (305 mm) for both
The PTO shaft Drving plate 10" (254 mm)
Gear Box  
Gear Box Mechanical Sliding Mesh Gearbox with constant mesh gear at the input side and a palnetary reduction gear unit at the gearbox output side to give 8 forward and 2 reverse speeds
Final drive Crown Wheel pinion with Differential
Power Take off  
Shaft Dia 1 3/8" (35 mm)
Splines 6
PTO Speed 540@ 1790 Erpm
Front Axle  

4WD Front Axle


Multi disc wet brakes operated by pendant pedals acting on the rear wheels simultaneously or independently. The same braking is used to apply the parking brakes

Type Hydrostatic

Hydraulic System

Pump MARK III, 4 Cylinder Piston Pump with suction stainer
Pump Capacity 16 LPM @ 540 PTO rpm
Lifting capacity 1450 Kg @ Lower link in Horizontal Position
Battery 12 V/75 Ah
Alternator 36 AMPs -12 V
Ignition Key operated
Safety Thro Neutral Switch switch
  • 2 headlights - 55/60 W/10A
  • 2 Front Parking -cum-side indicator lights 5 W
  • 2 Rear -brake-cum-side indicator lights 21 W
  • 1 work lamp 5 W, 10 A, halogen
  • Hazard warning system
Wheels and Tyres  
Front 260 X 80 R20
Rear 13.6 X 26- 12 PR
Wheel Track  
Front 1346 to 1448 mm
Rear 1320 -1930 mm
Adjustment steps 102 mm
Dimensions and weight  
Overall length (3075 mm) Lower Link in Horizontal Position
Overall width (mm) (1650 mm)
Overall Height (mm) (2225 mm) top of vertical exhaust
  56.9" (1445 mm) top of steering wheel
Wheelbase (mm) (1830 mm)
Min Ground Clearance

(340 mm) under gearbox

Total Weight without accessories 2055 kg
Fuel tank 47 litres
Crank case 6.5 litres
Hydraulic system 34 litres
Cooling system 10.0 litres
Steering box 1 litre

Standard Fatures

Differential Lock, Square swing up bonnet, Flat Top fenders, Vertical Exhaust, foot throttle, Hand parking brake, Tool box, Spring Suspension Seat, Swinging Drawbar, chain stabalizer kit, Hour cum rpm meter, oil pressure gaugue, coolant temperature gaugue, main beam indicator, Fuel gaugue, Ammeter, Indicators for High Beam, Battery charge, Turn LH/RH, 4WD engagement, Front weight frame.

Variable Feature

ROPS, Front Weights, Rear Wheel Weights, Suncanopy, Auxilary Hydraulics