aggregates specifications
Make/Type Simpson S324 Direct Injection Diesel engine
Cylinders 3
Bore/Stroke 91.44/127 mm (3.6"/5")
Cubic Capacity 152 cubic inches (2.5) litres
PTO Horsepower 36.8 HP (27.45 Kw) @ 2000 Erpm
Air cleaner Oil Bath Type
Cooling Pressurized water cooling
Fuel Injection Pump Make MICO Inline Pump
Rated Engine HP 43.0 HP (32.1 Kw)gross @ 2000 Erpm as per BS Au 141 a
Starting Aid Intake Manifold Heater
Type Dual Dry friction type
Tractor Driving plate 12" (305 mm) for both
The PTO shaft Drving plate 10" (254 mm)
Gear Box  
Gear Box Mechanical Sliding Mesh Gearbox with constant mesh gear at the input side and a palnetary reduction gear unit at the gearbox output side to give 8 forward and 2 reverse speeds
Power Take off  
Power Take-off 1 3/8" (34.5.9 mm) dia 6 spline live without ground speed. PTO speed 604 rpm at 2000 engine rpm. Engine to PTO ratio: 3.3125:1

Mechanical, internally expanding brake shoes acting on the rear wheels simultaneously or independently. The same braking is used to apply the parking brakes

Type Manual

Hydraulic System

Functions Position, Draft and 3 point linkage Cat I
12 volt Negative earth system  
Battery 12 V/85AH
Alternator 28 AMPs -12 V
Ignition Key operated
Safety Thro Neutral Switch switch
  • 2 headlights
  • 2 Front Parking -cum-side indicator lights
  • 2 Rear -brake-cum-side indicator lights
  • 1 work lamp
  • Hazard warning system
Wheels and Tyres  
Front 6.00 X 16 6 ply rating
Rear 12.4 X 28 8 ply rating
Wheel Track  
Front (48"x72") 1220-1830 mm
Rear (52"x76") 1320 -1930 mm
Adjustment steps 4" (100 mm)
Dimensions and weight  
Overall length 118.5" (3010 mm)
Overall width (mm) 65" (1650 mm)
Overall Height (mm) 86.6" (2200 mm) top of vertical exaust
  56.9" (1445 mm) top of steering wheel
Wheelbase (mm) 72.0" (1930 mm)
Min Ground Clearance
  • 21.0" (533mm) Under axle
  • 12.5" (320 mm) under gearbox)
Total Weight without accessories 1600 kg (3520 lbs)
Fuel tank 9.02 Gal (34 litres)
Crank case 6.9 qts (6.5 litres)
Hydraulic system 7.56 Gal (28.5 litres)
Cooling system 10.6 qts(10.0 litres)
Steering box 1.06 qts (1 litre)

Standard Fatures

Shell fenders, foot throttle, Hand parking brake, Vertical Exhaust, Tool box, Swinging Drawbar, chain stabalizer kit, Hour cum rpm meter, oil pressure gaugue, coolant temperature gaugue, main beam indicator, ignition ON indicator, and Blinker warning switch.

Variable Feature

Compressor, Oil Pipe Kit, 7 pin trailer socket, Shell fenders, ROPS, Seat Belt, Front wieght platform and weights, CAT II (interchangable ball)